Menu
Need Auto Detailing?
Sierra Invisible Shield has added a new feature to our menu...Auto Detailing! Whether you are keeping you car and want to maintain it’s new look, or selling your car and want to get the most value, from the sale. Do what the dealers do “Clean It”
It works for them...
It will also work for you...
Let the experts at Sierra Invisible
Shield provide
the quality care that will beautify your cars interior
and exterior finish!
FAQ
Venture Shield and headlight protection are significant investments into keeping your vehicle looking its best. If you happen to have questions not found below, please feel free to contact us with any questions. We also encourage customers to stop by and visit our shop.
What is VentureShield?
Can I install a clear bra film or headlight protection myself?
Will it really stop rocks from chipping the car?
Can I wash and wax protective film?
Is the application of the film permanent?
Can a clear bra film be removed from vehicle and used again?
Will there be a “two tone” effect in the paint if the film
is ever removed?
Will film harm the painted surface if film is removed?
Can you paint or apply a clearcoat over the urethane film
or headlight overlay?
Can the urethane film be applied over graphics?
Does the urethane film stick to plastic?
How long should I wait to apply your product if my car has
been repainted?
What is Venture Shield?
Venture Shield is the toughest chip protection film on the market.
Combining excellent elastic properties and optical clarity with a high
shear and track adhesive. VentureShield is twice as stone resistant as
the leading competitor.
Can I install a clear bra film or headlight protection myself?
The materials for a clear bra package can cost anywhere
between 400-600 dollars and you will be running the risk of damaging
the film when applying it yourself. Because of this, we recommend
that your clear bra or headlight protection be installed by a fully
trained, professional applicator. Professional installers have the
past experience and skill required to apply the film around complex
curves, challenging grillwork, wheel opening, bumpers and all other
areas on today’s vehicles.
Will it really stop rocks from chipping the car?
Yes, the material was originally designed to stop chips
on helicopter rotor blades and airplane propellers. It is much easier
for the product to protect your vehicles paint than a propeller
moving at nearly the speed of sound.
Can I wash and wax protective film?
Yes. The urethane film loves to be washed waxed just as
if it where not present.
When waxing the vehicle, some was may build up along the
film edges. This can easily be removed when dry with a soft brush
such as a toothbrush or detailer brush.
*Do not use any waxes containing dyes or waxes that are
not recommended for urethanes
*Abrasive polishes and/or rubbing compounds are not to be
used.
*One way to minimize the wax buildup is to use spray wax
around the film edges. Such
as PLEXUS.
Is the application of the film permanent?
No. It can be removed at anytime.
Can a clear bra film be removed from vehicle and used again?
No. Once the film has been applied and set, the adhesive
will not stick a second time.
Will there be a “two tone” effect in the paint if the film
is ever removed?
No. Venture Shield film is UV stable, allowing UV rays to
penetrate, eliminating the “two tone shades” of paint problem resulting
from traditional car “bras”.
Will film harm the painted surface if film is removed?
If the film is properly applied to a fully cured painted
vehicle, it can be removed without damaging paint surfaces beneath
the film. Warning: If film is applied to a repainted, older or not
properly cured paint there is a slight risk of the paint being peeled
off.
Can you paint or apply a clearcoat over the urethane film
or headlight overlay?
No, this is not recommended and is at your own risk.
Can the urethane film be applied over graphics?
Yes, it can be applied over vinyl graphics HOWEVER, if the
film is removed damage may occur to the underlying graphic during
the removal process.
Does the urethane film stick to plastic?
Yes, only to smooth surfaces.
How long should I wait to apply your product if my car has
been repainted?
You will need to talk to your body shop and see what they
recommend. The time will vary depending on the type of paint the
body shop used, and whether or not the paint was baked. In any case,
the time that they say you should wait to wax the paint, is the
same time you will need to wait to install our product.
Contact Us
Sierra Invisible Shield
Dexter & Tom Baker
1645 Crane Way
Sparks, NV 89431
Office (775) 857-2606
Fax: (775) 322-1023
dexter@nvbell.net
Blogs
- Check out our Blog
Yuri Cabrera
Detail Manager
Sierra Invisible Shield now has auto detailing.